 |
 |
 |
 |
 |
GREASE STICK
(WHITE) K |
 |
GREASE STICK AB R |
 |
TRIPOLI K-1 |
 |
TRIPOLI K-2 |
 |
TRIPOLI K-0 |
 |
TRIPOLI Y-3 |
|
 |
GREASE STICK AB
(in paper cylinder) |
 |
GREASE STICK WHITE
(in paper cylinder) |
|
|
|
|
 |
| <Buffing and Polishing Compounds for Prevention of Burning> |
|
| Solid Compound |
Characteristics / Application |
| Product Name | Color |
Pcs/
Box |
| GREASE STICK WHITE K |
Ivory |
20 |
Popular item used on sanding belt, emery buffs, grinding stones, or non-woven
wheels for lubrication or prevention of burning. |
| GREASE STICK AB R |
Light Brown |
20 |
Good on abrasive belts or KF wheels for lubrication or prevention of burning.
( It is a little sticky ) Kept in a paper cylinder |
| TRIPOLI K-1 |
Red |
25 |
It has effects of lubrication and prevention from burning, and at the same time,
the grains inside tripoli compounds give you a smoother surface by reducing the emery buffs' (or belts' and wheels') sharp and powerful cutting ability. |
| TRIPOLI K-2 |
Beige |
25 |
| TRIPOLI K-0 |
Red |
25 |
| TRIPOLI Y-3 |
Red |
25 |
|
|
|
 |
 |
|
Satiner (Greaseless compound)
Satiner, also calld as greaseless compound or satin finish compound,
is a kneaded compound which is made by dispersing abrasive grains into water-soluble bond such as glue.
It is specially designed for satin finish, and used by applying to buff surfaces same as buffing and polishing compounds.
Since this compound has less adherence to buffs compare to other polishing compounds,
thrust Satiner to a face of a spinning buff until Satiner is softened up.
Once Satiner gets soft, move it on the buff surface and apply.
Then, before polishing, spin the buff for 30 - 60 seconds until Satiner is hardened and stabilized.
Conventional cloth loose buff C-type and calico buff are usually recommended for this compound.
This compound should be kept in a refrgerator or cool place.
It easily gets too dry and too hard to be applied to buffs, so keep it tightly sealed in a vinyl bag. |
|
|
|
| < Types and Applications > |
|
| Name |
Grit |
Grit Size |
Color |
Pcs/Box |
Application |
| SATINER K |
A |
80 |
Brown |
25 Pcs |
For satin finish of stainless steel and non-ferrous metal such as copper plateed surfaces,
brass or bronze.
More adherent to buffs than silicon carbide type (C) of Satiner. |
| SATINER J |
100 |
Brown |
25 Pcs |
| SATINER H |
220 |
Brown |
25 Pcs |
| SATINER L |
280 |
Brown |
25 Pcs |
| SATINER S |
320 |
Brown |
25 Pcs |
| SATINER I |
C |
100 |
Black |
25 Pcs |
For satin finish of stainless steel.
Higher grade finishing surfaces can be obtained compare to alumina type (A) of Satiner. |
| SATINER A |
150 |
Black |
25 Pcs |
| SATINER M |
220 |
Black |
25 Pcs |
| SATINER PU |
|
Auxiliary agent (For undercoat *) |
|
|
|
| * |
"Satiner PU" enhances the endurance of other kinds of Satiner.
There is no need to apply "Satiner PU" to buffs every time.
Apply It once in a few times before you apply other Satiners. |
|
|
| <Recommended Peripheral Speed > |
|
| Works Material |
Wheel Speed (m/min) |
| Stainless Steel |
|
| Copper Alloy |
|
| Diecasting |
|
| Copper Plate |
|
| Nickel Plate |
|
| Chrome Plate |
|
|
|
|
 |
 |
|
| It is indispensable compound in grinding operation of valves of many kinds of machineries and automobiles. |
|
|
|
| Grit |
Pcs/Box |
| Coarse (C#120) |
200g/Can
24 Cans/Box |
| Medium (C#180) |
| Fine (C#220) |
| Very Fine (C#320) |
|
|
|
 |
|
